(Bio)isosteres of ortho- and meta-substituted benzenes

• H. Erik Diepers and
• Johannes C. L. Walker

Beilstein J. Org. Chem. 2024, 20, 859–890, doi:10.3762/bjoc.20.78

• from both compounds. The first investigation of 1,2-BCPs as an isosteric replacement for ortho-benzene was reported by Baran, Collins and co-workers [26]. They prepared a wide variety of 1,2-BCPs from a common 2-substituted [1.1.1]propellane building block, propellane 3a (Scheme 1A). Propellane 3a was

• methylation of the intermediate diacid. As for the 1,2-cubanes, the authors were able to derivatise this general building block into a range of other 1,3-cubanes via metallophotoredox catalysis using acid 167 and redox active esters 168 and 169 (Scheme 17B) [51]. Arylation (to 170), amination (to 171) and

Skeletal rearrangement of 6,8-dioxabicyclo[3.2.1]octan-4-ols promoted by thionyl chloride or Appel conditions

• Martyn Jevric,
• Julian Klepp,
• Johannes Puschnig,
• Oscar Lamb,
• Christopher J. Sumby and
• Ben W. Greatrex

Beilstein J. Org. Chem. 2024, 20, 823–829, doi:10.3762/bjoc.20.74

• cyrene (2) allows for its use as a chiral solvent [4]. This product is emerging as a promising platform chemical for the construction of chiral small molecules for pharmaceuticals [5][6][7][8], as a building block for catalysts and auxiliaries [9][10][11], and in materials applications [12][13][14]. New

Switchable molecular tweezers: design and applications

• Pablo Msellem,
• Maksym Dekthiarenko,
• Nihal Hadj Seyd and
• Guillaume Vives

Beilstein J. Org. Chem. 2024, 20, 504–539, doi:10.3762/bjoc.20.45

• release of siRNA or miRNA encapsulated within them into the solution in vitro and in vivo [21]. The closed conformation of 2 with parallel alkyl chains acts as a building block of the bilayer membrane and is packed together with other lipids. When the surrounding medium becomes acidic, the tweezers adopt

Synthesis of π-conjugated polycyclic compounds by late-stage extrusion of chalcogen fragments

• Aissam Okba,
• Pablo Simón Marqués,
• Kyohei Matsuo,
• Naoki Aratani,
• Hiroko Yamada,
• Gwénaël Rapenne and
• Claire Kammerer

Beilstein J. Org. Chem. 2024, 20, 287–305, doi:10.3762/bjoc.20.30

• -substituted soluble precursors 3a–f owing to increased modularity (Scheme 5) [62]. To this aim, acenaphthene was selected as key building block and it underwent two successive regioselective halogenations to give bromochloroacenaphthene 8 in 64% overall yield. The latter was next converted into the

Optimizations of lipid II synthesis: an essential glycolipid precursor in bacterial cell wall synthesis and a validated antibiotic target

• Milandip Karak,
• Cian R. Cloonan,
• Brad R. Baker,
• Rachel V. K. Cochrane and
• Stephen A. Cochrane

Beilstein J. Org. Chem. 2024, 20, 220–227, doi:10.3762/bjoc.20.22

• is synthesized on the inner leaflet of the cytoplasmic membrane, before translocation to the outer leaflet, where it is then used as the monomeric building block of peptidoglycan biosynthesis. Lipid II is a validated antibiotic target for clinically prescribed antibiotics including vancomycin and

Multi-redox indenofluorene chromophores incorporating dithiafulvene donor and ene/enediyne acceptor units

• Christina Schøttler,
• Kasper Lund-Rasmussen,
• Line Broløs,
• Philip Vinterberg,
• Ema Bazikova,
• Viktor B. R. Pedersen and
• Mogens Brøndsted Nielsen

Beilstein J. Org. Chem. 2024, 20, 59–73, doi:10.3762/bjoc.20.8

• explore further annellation of dihydropyrrole and pyrrole units at the DTF moiety of an IF-DTF. A phosphite-mediated coupling of either 1,3-dithiole-2-thione 2, 7, or 8 with IF dione 1 afforded IF-DTFs 9–11, as shown in Scheme 1. Compound 11 was also obtained from building block 4 via the pyrrolo

• various elaborate systems [24][25][26][27]. Next, we wanted to explore IF-DTFs as motifs for acetylenic scaffolding (Scheme 4). Starting from IF-DTF building block 6, dibromo-olefinated compound 18 was obtained by a Ramirez/Corey–Fuchs reaction. Two-fold Sonogashira couplings with trimethylsilylacetylene

Facile access to pyridinium-based bent aromatic amphiphiles: nonionic surface modification of nanocarbons in water

• Lorenzo Catti,
• Shinji Aoyama and
• Michito Yoshizawa

Beilstein J. Org. Chem. 2024, 20, 32–40, doi:10.3762/bjoc.20.5

• -dibromopyridine. Negishi cross-coupling with 9-anthrylzinc chloride in the presence of PdCl2(PhCN)2/P(t-Bu)3 as catalyst afforded the common precursor 3,5-dianthrylpyridine (prePA), a simple yet novel bent building block, in 81% yield. For the synthesis of the methyl derivative, prePA was N-alkylated with excess

• materials. Conclusion We have developed new pyridinium-based bent amphiphiles PA-R that can be facilely accessed from simple yet novel building block 3,5-dianthrylpyridine in 1–3 steps. The amphiphiles quantitatively self-assembled into ≈2 nm-sized aromatic micelles (PA-R)n via the hydrophobic effect and π

GlAIcomics: a deep neural network classifier for spectroscopy-augmented mass spectrometric glycans data

• Thomas Barillot,
• Baptiste Schindler,
• Baptiste Moge,
• Elisa Fadda,
• Franck Lépine and
• Isabelle Compagnon

Beilstein J. Org. Chem. 2023, 19, 1825–1831, doi:10.3762/bjoc.19.134

• ), thus providing valuable additional isomer resolution [4]. We demonstrated that this multidimensional MS–IR molecular fingerprint is unique to each carbohydrate building block and can be used to resolve their full sequence, including their monosaccharide content and the detail of their linkages

Tying a knot between crown ethers and porphyrins

• Maksym Matviyishyn and
• Bartosz Szyszko

Beilstein J. Org. Chem. 2023, 19, 1630–1650, doi:10.3762/bjoc.19.120

• presented a crown ether-expanded Schiff porphyrinoid synthesis [56]. Compound 15 incorporated a tripyrrane unit merged with an oligo(ethylene glycol) chain through imine linkages (Scheme 5). The hybrid comprised a core shared amongst a tripyrrane building block and a segment of crown ether linked through

Synthesis of 7-azabicyclo[4.3.1]decane ring systems from tricarbonyl(tropone)iron via intramolecular Heck reactions

• Aaron H. Shoemaker,
• Elizabeth A. Foker,
• Elena P. Uttaro,
• Sarah K. Beitel and
• Daniel R. Griffith

Beilstein J. Org. Chem. 2023, 19, 1615–1619, doi:10.3762/bjoc.19.118

• ring system [5] (3, Scheme 1). We sought to demonstrate that this iron complex could serve as a common, versatile building block for additional azapolycyclic skeletons. The 7-azabicyclo[4.3.1]decane ring system is found within several complex alkaloids, including daphnicyclidin A [6][7][8][9] and

• of tropone as a synthetic building block for accessing functionalized azapolycycles containing seven-membered rings. Complex alkaloids containing the 7-azabicyclo[4.3.1]decane ring system. Synthesis of diverse azapolycycles from iron complex 2 derived from tricarbonyl(tropone)iron. Synthesis of Heck

Synthesis of ether lipids: natural compounds and analogues

• Marco Antônio G. B. Gomes,
• Alicia Bauduin,
• Chloé Le Roux,
• Romain Fouinneteau,
• Wilfried Berthe,
• Mathieu Berchel,
• Hélène Couthon and
• Paul-Alain Jaffrès

Beilstein J. Org. Chem. 2023, 19, 1299–1369, doi:10.3762/bjoc.19.96

• was converted to the epoxide 7.5 by cyclisation in the presence of potassium carbonate in methanol, thus producing the interesting building block 7.5. A second option, optimized to avoid the formation of epoxide, used a hindered base and the reactive benzyltriflate as electrophile to achieve under

Pyridine C(sp²)–H bond functionalization under transition-metal and rare earth metal catalysis

• Haritha Sindhe,
• Malladi Mounika Reddy,
• Karthikeyan Rajkumar,
• Akshay Kamble,
• Amardeep Singh,
• Anand Kumar and
• Satyasheel Sharma

Beilstein J. Org. Chem. 2023, 19, 820–863, doi:10.3762/bjoc.19.62

• optimized conditions in hand, diverse 2-arylated pyridines were screened resulting in the corresponding products 74 in good yields. Allene, a cumulated diene and an important building block in organic synthesis has versatile biological properties and is also an important subunit in various natural products

Facile access to 3-sulfonylquinolines via Knoevenagel condensation/aza-Wittig reaction cascade involving ortho-azidobenzaldehydes and β-ketosulfonamides and sulfones

• Ksenia Malkova,
• Andrey Bubyrev,
• Stanislav Kalinin and
• Dmitry Dar’in

Beilstein J. Org. Chem. 2023, 19, 800–807, doi:10.3762/bjoc.19.60

• synthesis of quinoline-3-sulfonyl chlorides which are the most common reagents for their preparation. As a possible solution, the approach to the heterocyclic core construction from a sulfonamide-containing building block may be considered. In turn, diversely substituted quinoline-3-sulfones are available

Construction of hexabenzocoronene-based chiral nanographenes

• Ranran Li,
• Di Wang,
• Shengtao Li and
• Peng An

Beilstein J. Org. Chem. 2023, 19, 736–751, doi:10.3762/bjoc.19.54

• nanomaterials, the design, and construction of chiral nanographenes is a hot topic recently. As a classic nanographene unit, hexa-peri-hexabenzocoronene generally serves as the building block for nanographene synthesis. This review summarizes the representative examples of hexa-peri-hexabenzocoronene-based

• derivatives have attracted increasing attention due to their specific optoelectronic properties [5][29]. HBC thus generally serves as a reference structure or building block to construct chiral NGs which are currently receiving a lot of interest in carbon-based materials science. This review will mainly focus

• the prefused building block in a 49% yield. Then naphthalene and phenanthrene residues were introduced into compound 33 through Suzuki coupling reaction, the corresponding precursors 34 and 36 were obtained respectively in high yields. The final cyclodehydrogenation using DDQ and TfOH proceeded

Palladium-catalyzed enantioselective three-component synthesis of α-arylglycine derivatives from glyoxylic acid, sulfonamides and aryltrifluoroborates

• Bastian Jakob,
• Nico Schneider,
• Luca Gengenbach and
• Georg Manolikakes

Beilstein J. Org. Chem. 2023, 19, 719–726, doi:10.3762/bjoc.19.52

• sterically hindered arylboronic acids. Herein, we report an improved version of this palladium-catalyzed enantioselective three-component reactions using aryltrifluoroborates as replacement of the arylboronic acid building block (Scheme 1d). The broader scope of this 2nd generation protocol is exploiting a

• slow release of the boronic acid from the aryltrifluoroborates and enables to enantioselectively synthesize of a broader variety of arylglycines, including a common building block for several biologically active compounds. Results and Discussion During our previous studies, we observed that the

• to our previous study with the corresponding boronic acids [22]). Synthesis of both enantiomers of arylglycine building block 18. Reaction optimization. Supporting Information Supporting Information File 176: Experimental section and characterization data. Funding Financial support by the research

Synthesis and reactivity of azole-based iodazinium salts

• Thomas J. Kuczmera,
• Annalena Dietz,
• Andreas Boelke and
• Boris J. Nachtsheim

Beilstein J. Org. Chem. 2023, 19, 317–324, doi:10.3762/bjoc.19.27

• imidazoiodaziniums, we show highly delicate post-oxidation functionalizations retaining the hypervalent iodine center. Keywords: building block; heterocycles; hypervalent compounds; iodonium salts; one-pot synthesis; Introduction The chemistry of hypervalent iodine compounds, in particular aryl-λ3-iodanes, is

1,4-Dithianes: attractive C2-building blocks for the synthesis of complex molecular architectures

• Bram Ryckaert,
• Ellen Demeyere,
• Frederick Degroote,
• Hilde Janssens and
• Johan M. Winne

Beilstein J. Org. Chem. 2023, 19, 115–132, doi:10.3762/bjoc.19.12

• synthesis of 1,4-dithiane-type ring systems is not the primary focus of this review, the synthetic accessibility of these building blocks is of course an important consideration, and it impacts the utility of any building block-based strategy [19][20][21][22][23][24]. The commercially available 1,4-dithiane

• access to building block 2. The benzannelated series of 1,4-dithiane heterocycles 5–7 can in principle be obtained using Parham’s α-halocarbonyl condensation and rearrangement approach, starting from benzene-1,2-dithiol. More conveniently, however, ethanedithiol and cyclohexanone can be condensed, and

• quantities from a limited number of suppliers. Oxidation and dehydration of 5 to the fully unsaturated ring system 6 is quite straightforward (especially compared to the same reactions on 1,4-dithiane (1)), and yields the useful building block 6. For the availability of the disulfone series of derivatives of

Navigating and expanding the roadmap of natural product genome mining tools

• Friederike Biermann,
• Sebastian L. Wenski and
• Eric J. N. Helfrich

Beilstein J. Org. Chem. 2022, 18, 1656–1671, doi:10.3762/bjoc.18.178

• by tailoring enzymes that decorate the NP scaffold. Assembly line-like pathways are characterized by mega enzymes, which can be subdivided into modules. Each module is responsible for the incorporation (and/or processing) of one building block into the nascent product. A “textbook” extension module

• minimally harbors three core domains, responsible for the activation and loading, tethering, and condensation of building blocks and intermediates. The biosynthesis is directional and starts at the N-terminal module with the activation and loading of the first building block onto the assembly line (Figure

•  2A) [21]. The specificity of the activating domain determines the type of building block incorporated. The growing intermediate stays permanently bound to the assembly line until the final product is released at the C-terminal module. However, modules can also be skipped, used for the modification of

Simple synthesis of multi-halogenated alkenes from 2-bromo-2-chloro-1,1,1-trifluoroethane (halothane)

• Yukiko Karuo,
• Atsushi Tarui,
• Kazuyuki Sato,
• Kentaro Kawai and
• Masaaki Omote

Beilstein J. Org. Chem. 2022, 18, 1567–1574, doi:10.3762/bjoc.18.167

• ) has been used as a fluorine-containing building block for the construction of trifluoromethyl and difluoromethylene motifs [1][2]. Such structures have been found in several multifunctional materials and biologically important molecules (Figure 1) [3][4][5][6][7]. The halothane structure contains two

Solid-phase total synthesis and structural confirmation of antimicrobial longicatenamide A

• Takumi Matsumoto,
• Takefumi Kuranaga,
• Yuto Taniguchi,
• Weicheng Wang and
• Hideaki Kakeya

Beilstein J. Org. Chem. 2022, 18, 1560–1566, doi:10.3762/bjoc.18.166

• unavailable building blocks 7 and 10 were chemically constructed from readily available starting materials. The synthesis of building block 10 commenced with the synthesis of compound 15 through Wittig reaction of Garner’s aldehyde (13) [16], which was readily obtained from tert-butyloxycarbonyl (Boc

• longicatenamides A–D (1–4). LC–MS extracted ion chromatograms (EICs) of synthesized and natural 1. Column: Imtakt Cadenza CD-C18 3 × 150 mm; eluent: MeCN/H2O/TFA 30:70:0.05, isocratic, 0.2 mL/min; 40 °C. Retrosynthesis of longicatenamycin A (1). Synthesis of building block 10. Synthesis of building block 7. Total

A study of the DIBAL-promoted selective debenzylation of α-cyclodextrin protected with two different benzyl groups

• Naser-Abdul Yousefi,
• Morten L. Zimmermann and
• Mikael Bols

Beilstein J. Org. Chem. 2022, 18, 1553–1559, doi:10.3762/bjoc.18.165

• substances such as pharmaceuticals or fragrances is exploited since it is cheap, harmless and biodegradable [4]. It is also a useful building block for sensors and/or capture devices, advanced materials, and even artificial enzymes. Most such uses require that compound 1 can be chemically modified so that

Synthesis of C6-modified mannose 1-phosphates and evaluation of derived sugar nucleotides against GDP-mannose dehydrogenase

• Sanaz Ahmadipour,
• Alice J. C. Wahart,
• Jonathan P. Dolan,
• Laura Beswick,
• Chris S. Hawes,
• Robert A. Field and
• Gavin J. Miller

Beilstein J. Org. Chem. 2022, 18, 1379–1384, doi:10.3762/bjoc.18.142

• interventions that could halt its production would be of significant value. Within the biosynthetic assembly of alginate there is a critical dependence upon the provision of one sugar nucleotide building block, GDP-mannuronic acid (GDP-ManA, 5). This material is sourced from the cytosolic metabolic pool

Vicinal ketoesters – key intermediates in the total synthesis of natural products

• Marc Paul Beller and
• Ulrich Koert

Beilstein J. Org. Chem. 2022, 18, 1236–1248, doi:10.3762/bjoc.18.129

• diesters and ester amides as key intermediates (+)-Awajanomycin Diethyl mesoxalate (90a) is a valuable building block due to the high density of carbon atoms in high oxidation states. As a vic-tricarbonyl compound, its central keto group is an especially potent electrophile. The Koert group used this

Mechanochemical bottom-up synthesis of phosphorus-linked, heptazine-based carbon nitrides using sodium phosphide

• Blaine G. Fiss,
• Georgia Douglas,
• Michael Ferguson,
• Jorge Becerra,
• Jesus Valdez,
• Trong-On Do,
• Tomislav Friščić and
• Audrey Moores

Beilstein J. Org. Chem. 2022, 18, 1203–1209, doi:10.3762/bjoc.18.125

• constitutes the building block of g-CN, as opposed to in a linking position. Computational studies by Hartley and Martsinovich have investigated the influence of various linkers, including phosphorus atoms, on both the structure and optical behavior of heptazine-based graphitic carbon nitrides [3]. Yet

Reductive opening of a cyclopropane ring in the Ni(II) coordination environment: a route to functionalized dehydroalanine and cysteine derivatives

• Oleg A. Levitskiy,
• Olga I. Aglamazova,
• Yuri K. Grishin and
• Tatiana V. Magdesieva

Beilstein J. Org. Chem. 2022, 18, 1166–1176, doi:10.3762/bjoc.18.121

• provides targeted pharmacophoric properties of the bio-active molecule [23] but also opens a route to its further functionalization, being a building block with wide variety of reactivity. A donor–acceptor cyclopropane concept suggested in the 1980s [24] became extremely popular in the recent decade [25